Teltonika RUT241 Black Modem LTE antennas (2), WiFi antenna (1), Ethernet cable, Power supply

Select Features and Specifications:

Mobile
• Mobile module: 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps.
• 3GPP Release: Release 10/11 depending on the hardware version.
• eSIM*: Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans.
  ‎ *Feature availability varies by order code.
• SIM switch*: 1 x 2FF SIM and 1 x eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail.
  ‎ *Feature availability varies by order code.
• Status: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC.
• SMS: SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP.
• USSD: Supports sending and reading Unstructured Supplementary Service Data messages.
• Block/Allow list: Operator block/allow list (by country or separate operators).
• Multiple PDN: Possibility to use different PDNs for multiple network access and services.
• Band management: Band lock, Used band status display.
• SIM PIN code management: SIM PIN code management enables setting, changing, or disabling the SIM card's PIN.
• APN: Auto APN.
• Bridge: Direct connection (bridge) between mobile ISP and device on LAN.
• Passthrough: Router assigns its mobile WAN IP address to another device on LAN.


Wireless
• Wireless mode: 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA).
• Wi-Fi security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF).
• SSID/ESSID: SSID stealth mode and access control based on MAC address.
• Wi-Fi users: Up to 50 simultaneous connections.
• Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k).
• Wireless MAC filter: Allowlist, blocklist.
• Wireless QR code generator: Once scanned, a user will automatically enter your network without needing to input login information.
• TravelMate: Forward Wi-Fi hotspot landing page to a subsequent connected device.


Ethernet
• WAN: 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX.
• LAN: 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX.


Network
• Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing.
• Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN.
• VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets.
• Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection.
• Firewall: Port forward, traffic rules, custom rules, TTL target customisation.
• Firewall status page: View all your Firewall statistics, rules, and rule counters.
• Port management: View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on.
• Network topology: Visual representation of your network, showing which devices are connected to which other devices.
• Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes.
• DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards.
• QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e.
• DDNS: Supported >77 service providers, others can be configured manually.
• DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS.
• Network backup: Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover.
• Load balancing: Balance Internet traffic over multiple WAN connections.
• SSHFS: Possibility to mount remote file system via SSH protocol.
• Traffic Management: Real-time monitoring, wireless signal charts, traffic usage history.


Security
• Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator.
• Firewall: Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64.
• Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks).
• VLAN: Port and tag-based VLAN separation.
• Mobile quota control: Mobile data limit, customizable period, start time, warning limit, phone number.
• WEB filter: Block list for blocking out unwanted websites, allow list for specifying allowed sites only.
• Access control: Flexible access control of SSH, Web interface, CLI and Telnet.
• Certificate Manager: Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates.
• 802.1x: Port-based network access control server.


VPN
• OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods.
• OpenVPN Encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256.
• IPsec: XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16).
• GRE: GRE tunnel, GRE tunnel over IPsec support.
• PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support.
• Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code.
• DMVPN: Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support.
• SSTP: SSTP client instance support.
• ZeroTier: ZeroTier VPN client support.
• WireGuard: WireGuard VPN client and server support.
• Tinc: Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.


System Characteristics
• CPU: Mediatek, 580 MHz, MIPS 24KEc.
• RAM: 128 MB, DDR2.
• FLASH storage: 16 MB, SPI Flash.


Physical Specification
• Casing material: Aluminium housing, plastic panels.
• Dimensions (W x H x D): 83 x 25 x 74 mm.
• Weight: 125 g.
• Mounting options: DIN rail, wall mount, flat surface (all require additional kit).


Operating Environment
• Operating temperature: -40 °C to 75 °C.
• Operating humidity: 10% to 90% non-condensing.
• Ingress Protection Rating: IP30.

For a complete list of specifications, please visit the manufacturer's website.

All functionality, features, specifications and other product information provided in this document including, but not limited to, the benefits, design, pricing, components, performance, availability, and capabilities of the product are subject to change without notice.